Skip to content
Size Matters: Why Choosing the Right Vanity is Crucial

Size Matters: Why Choosing the Right Vanity is Crucial

Looking to spruce up your bathroom with a sparkling new vanity? Choosing just the right vanity to fit both visually and practically within your washroom can prove to be a tough decision. A variety of factors from width, depth, and height to the overall space layout and compatibility considerations come into play. Here's a comprehensive guide to take you through the process of selecting the appropriate size for your bathroom vanity.
Understanding the Scope of Your Project
The first step in undertaking this task requires recognizing the scope of your project. If your focus is replacing a pre-existing vanity with an identical size, start with dimensioning your current vanity. In case you're just starting out from scratch, the available bath space will determine your further actions.
Deciding on the Right Vanity Width
The selection process for the ideal vanity width begins with a thorough measurement of your available bathroom space. Make a note of the wall-to-wall distance while also considering the space required for your bathing and shower doors to swing open fluidly. Single and double-sink vanities require at least 18 and 48 inches of available width respectively, with the vanity top adding up to one inch on either side.
Selecting the Appropriate Vanity Depth
The practicality and comfort level of your vanity strongly depend on its depth. While measuring the depth, ensure that there is sufficient clearance for the vanity drawers to open smoothly, and adequate room for you to move comfortably in front of the vanity. Generally, vanity depths range from 17 to 24 inches, with a recommended 30 inches of clear floor space.
Determining the Suitable Vanity Height
Multiple factors influence the ideal height for a vanity, including faucet height, backsplash positioning, and electrical outlets. For floating vanities, adjust the mounting such that the countertop hovers around the waist height. Typical vanity heights vary from 30 to 36 inches.
Upon gathering these measurements, navigate through standard vanity dimensions ranging from 18 to 72 inches in width, and around 20 inches in depth.

Bathroom Layout and Compatibility Considerations
Factor in your bathroom layout to corroborate that the vanity fits perfectly while leaving room for door swings and drawer pullouts. Ascertain that your toilet's center is at least 18 inches away from the vanity side, and maintain a minimum of 30 inches of clearance for your tub.
 Key Compatibility Factors
The compatibility of a bathroom vanity is also determined by your choice of faucet and its alignment with the sink hole placement on the vanity. Ensure that the scale of your vanity is congruous with other elements such as mirrors or cabinets. Make a note of existing elements like water outlets and switches to avoid obstructions.

Opting for the perfect vanity size synthesizes the aesthetics of your bathroom with your daily requirements. Imbue ageless elegance into your bathroom with a discerning vanity choice.


Products Recommended:

DeerValley DV-1V0096 24" Ceramic Vanity Top with Sink Faucet Holes

DeerValley DV-1V0097 24" Modern Ceramic Bathroom Vanity Top Sink with Sink Faucet Holes

DeerValley DV-1V0098 35" Ceramic Vanity Top with Sink Faucet Holes and Backsplash

Older Post
Newer Post

Added to cart